One hundred percent Andalusian technology in a new system that will revolutionize avionics

2022-11-24T09:17:56+01:0024 November 2022|Innovation|

The IMASAT consortium has developed a smaller, lighter on-board computer with great computing capacity compared to current systems on the market The international engineering company specializing in technologies applied to aeronautics Aertec has led the European project IMASAT (Integrated Modular Avionics for Small Air Transport) for the last four years, with the company Clue Technologies as a partner. This research [...]

2022-11-24T09:33:47+01:0015 November 2022|Front Page, Innovation|

The AGORA project takes off to consolidate Andalusia as a benchmark in the unmanned aerial vehicles sector Airbus and Fada-Catec join forces to develop a set of technologies for the safe integration of drones in airspace The Regional Minister of University, Research and Innovation, José Carlos Gómez Villamandos, has presented the AGORA project (Experimental Air Traffic Management Unit for Autonomous [...]

CT leads the KOIOS Artificial Intelligence project supported by the European Defense Fund, valued at 10 million euros

2022-07-26T08:39:43+02:0025 July 2022|Innovation|

The project has been selected by the European Commission to develop Artificial Intelligence (AI) applications in cases of military use CT, a leading engineering company in technological innovation throughout the entire product life cycle, as leader of the consortium, will coordinate the KOIOS Artificial Intelligence for Defense initiative, selected by the European Commission within the 2021 EDF call, whose results [...]

Aertec culminates with a test campaign for the UAS TARSIS an artificial intelligence project applied to flight safety sponsored by the European Defense Agency

2022-07-06T15:00:13+02:001 July 2022|Innovation|

SAFETERM addresses the use of state-of-the-art artificial intelligence/machine learning technologies to increase the level of safety in specific emergency situations leading to the termination of a flight The ATLAS Experimental Flight Center, in Villacarrillo (Jaén), has hosted the final phase of SAFETERM (Safe Autonomous Flight Termination System), a project sponsored by the European Defense Agency (EDA) and developed by [...]

Andalucía Aerospace leads its first project as an Innovative Business Association

2022-07-06T15:06:08+02:0017 June 2022|Innovation|

The IMPULSO project will allow the implementation of additive technology in the aerospace sector Andalucía Aerospace, as an Innovative Business Association (AEI), leads the IMPULSO Project subsidized by the Ministry of Industry, Commerce and Tourism through the Support Program for AEIs. This project arises from the initiative of three Spanish SMEs: Sevilla Control, Cubicoff Ingeniería Abierta, ARSoft, and two clusters: [...]

Ningenia wins the award for the innovative solution in the `Technological Challenge for the promotion of innovation´

2022-07-06T15:07:48+02:0014 June 2022|Innovation|

Cámaras Andalucía and the regional Ministry of Economic Transformation awarded the prizes for this pioneering initiative to promote technological solutions to the challenges of the industrial sector The Andalusian Council of Chambers of Commerce and the Regional Ministry of Economic Transformation, Industry, Knowledge and Universities presented the winners of the 'Technological Challenge for the promotion of innovation and the Andalusian [...]

CATEC applies aerial robotic technology for infrastructure inspection

2022-07-06T15:10:50+02:0026 April 2022|Innovation|

Within the PILOTING project, an aerial robot has been developed, AEROCAM, which has just carried out its first validation tests Increasing the efficiency of inspection and maintenance activities to preserve the necessary security levels of civil infrastructures aged by the passage of time has become a challenge. This is precisely the objective of the European research project PILOTING, made up [...]

Aertec, the UMA and Telefónica Tech develop a software project based on blockchain technology applied to the aeronautical industry

2022-07-06T15:12:02+02:0026 April 2022|Innovation|

This cooperation of the three entities is the result of their participation in the University Extension Course on Blockchain Technologies, directed by the NICS Lab Research group of the University of Malaga, and in which teachers from Telefónica Tech participate and Aertec is a collaborating company The Industrial Digitization area of ​​AERTEC, an international company specialized in aerospace technology, the [...]

Pegasus Aviación selects LiveU technology to improve its operations in emergencies and firefighting in Spain and Chile

2022-07-12T13:06:03+02:0016 February 2022|Innovation|

The multi-service aviation company deploys LiveU in its fleet to make better use of air resources, both in terms of safety and the information provided by its in-flight operations Pegasus Aviación, based in the south of Spain and with operations throughout the country, in addition to Portugal, Italy, Chile and Uruguay, has turned to LiveU to enrich its forest firefighting [...]

The new Airbus Racer helicopter will include parts manufactured with 3D printing at CATEC

2022-09-05T12:26:03+02:009 February 2022|Innovation, Newsletter|

CATEC has contributed with the delivery of several structural components produced by additive manufacturing (3D printing), being the first ones manufactured with this technology that will fly in an Airbus helicopter The Advanced Center for Aerospace Technologies, CATEC, is part of the OUTCOME consortium, which has been responsible for the design and production of the rear fuselage of the high-speed [...]

Go to Top